| Target: | Electrical Conductivity |
| Model: | ZW-C101 |
| Detection range: | 0~20000μS/cm |
| Characteristics: | Quick response; High sensitivity; Low power consumption |
| Output signal: | 4~20mA/RS485 |
| Response time: | ≤ 30s |
ZW-C101 Manual download
Get Price Whatsapp
Description
ZW-C101 model sensor is electrochemical electrical conductivity water quality detection sensor.It works by applying a constant voltage at both ends of the electrode of the sensor, so that the change of the resistance of the solution leads to a change of the current of the measuring electrode and the change is in accordance with Ohm's law, the the resistivity value could be replaced by conductivity value, so as to achieve the measurement of the conductivity of the solution.
Application
It is widely used in laboratory research, domestic sewage, industrial production, seawater testing and other fields of electrical conductivity detection.
Features
- Quick response
- High sensitivity
- Low power consumption
- Linear output
- RS485 signal output
Specifications
| Detection index | Parameter |
| Range | 0~20000μS/cm |
| Temperature range | 0~80C |
| Resolution | 0.01μS/cm |
| Response time (T 90) | ≤ 30s |
| Accuracy | ≤±3% |
| Protection class | Ip68 |
| Working Pressure | 0~4bar |
| Working humidity | Relative humidity ＜90% |
| Installation method | Immersion type |
| Signal output method | 4~20mA/RS485 |
| Calibration method | Two-point type |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
