| Target: | PM2.5, CO2, CH2O, TVOC,Temperature&Humidity |
| Model: | ZPHS01C |
| Detection range: | CO2: 400~5000ppm; PM2.5: 0-1000μg/m³; CH2O: 0-1.6ppm; VOC: 4 level; Temperature: 0-65℃ (Accuracy±0.5℃); Humidity: 0-100%RH (Accuracy±3%) |
| Detection principle: | Module, electrochemical, semiconductor VOC sensor, laser particle sensor, NDIR CO2 sensor and temperature & humidity sensor |
| Characteristics: | This module integrates Electrochemical formaldehyde, Semiconductor VOC sensor, Laser particle sensor, NDIR CO2 sensor and temperature & humidity sensor. |
| Size: | 62.5mm (L) x 61mm(W) x 25mm(H) |
| Output signal: | UART(TTL) |
ZPHS01C Manual download
Get Price Whatsapp
Description
This module integrates Electrochemical formaldehyde,
Semiconductor VOC sensor, Laser particle sensor, NDIR CO2 sensor and temperature& humidity sensor. (Users could choose CH2O version or VOC version, they are not concomitant.)
Communication Interface: TTL serial, Baud rate:9600, data bit:8, stop bit:1, parity bit: none.
Application
- Gas detector
- Air conditioner
- Air quality monitoring
- Air purifier
- HVAC system
- Smart home
Features
see manual
Specifications
| Model | ZPHS01C |
| Target Gas | PM2.5, CO2, CH2O, TVOC,Temperature&Humidity |
| Interference gas | Alcohol/CO gas…etc. |
| Working voltage | 5V (DC) |
| Average Current | ＜500 mA |
| Interface level | 3 V(compatible with 3.3V) |
| Output signal | UART(TTL) |
| Interface type | MX 1.25-4P |
| Preheat time | ≤ 3min |
| CO2 range | 400~5000ppm |
| PM2.5 range | 0~1000ug/m3 |
| CH2O range | 0~1.6ppm |
| TVOC range | 4 grades |
| Tem. range | 0～65℃ |
| Tem. precision | ±0.5℃ |
| Hum. range | 0~100% RH |
| Hum. precision | ±3% |
| Working Tem. | 0～50℃ |
| Working Hum. | 15~80% RH(no condensation) |
| Storage Tem. | 0～50℃ |
| Storage Hum. | 0~60% RH |
| Size | 62.5mm (L) x 61mm(W) x 25mm(H) |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
