Description
ZM102 is a low-power, miniaturized, digital air quality monitoring module for automotive air conditioning that uses MOS semiconductor gas sensors, MEMS manufacturing processes, and high-performance microprocessors. The AQS or AQM sensor module can be used to detect air pollution levels in the cabin and linked the air conditioner for intake air control and other processment.
Application
- Car Air Conditioning System
- Car Purifier
- Car Detector
Features
- MEMS manufacturing process
- High performance microprocessor
- Built-in intelligent algorithm
- High sensitivity
- Compact and precise
- Stable and reliable
- Ultra-low power consumption
- Anti-electromagnetic interference
Specifications
| Detection principle | MOS |
| Detection target | CO/HC、NOx、NH3 |
| Detection range | CO: 1～5000ppm NOx: 0～10ppm NH3: 1～300ppm |
| Operating voltage | DC (9～16)V |
| Operating current | ＜50mA |
| Quiescent Current | ＜10uA |
| Power consumption | ＜0.6W |
| Preheating time | 30s |
| IP rating | IP6K6K |
| Operating temperature | -40℃～85℃ |
| Storage temperature | -40℃～125℃ |
| Operating humidity | 5～95%RH (No condensation) |
| Connection type | Buckle, latch, clip |
| Output mode | LIN/PWM（Customizable） |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
