| Target: | CO, CO2, VOC, temperature, pressure |
| Model: | ZEQH-101 |
| Detection range: |
CO：0～1000ppm CO2：400～10000ppm VOC：200～10000ppm Pressure：0 ～130kPa Temperature：-40℃～200℃ |
| Detection principle: | Planar semiconductor NDIR |
| Output signal: | CAN/LIN（Customizable） |
| Response time: | T90＜15s |
| Notes: | IATF16949 compliant |
Get Price Whatsapp
Description
ZEQH-101 performs real-time monitoring of CO2, CO, VOC concentration, temperature, pressure and other indicators released before the battery thermal runaway is triggered, and transmits the monitored values to the vehicle battery management system (BMS), with measurement capabilities. It has notable features such as accurate parameters, fast response time, less cross-interference, low power consumption, long life and high reliability.
Application
- Automotive battery safety testing
Features
- IP rating up to IP65
- Digital interface output
Specifications
| All-in-one Lithium Battery Thermal Runaway Sensor | |
| Detection principle | Planar semiconductor NDIR |
| Detection target | CO, CO2, VOC, temperature, pressure |
| Detection range | CO：0～1000ppm CO2：400～10000ppm VOC：200～10000ppm pressure：0 ～130kPa temperature：-40℃～200℃ |
| Resolution ratio | CO：1ppm CO2：1ppm VOC：1ppm temperature：0.016℃ |
| Detection accuracy | CO：±10% Reading value CO2：±50ppm or ±5% Take the maximum reading VOC：±250ppm or ±25% Take the maximum reading pressure：±1kPa temperature：±2℃ |
| Operating voltage | DC (9～16)V |
| Operating current | ≤100mA |
| Power consumption | ≤1.2W |
| Interface level | 12V |
| Response time | T90＜15s |
| IP rating | IP65 |
| Operating temperature | -40℃～85℃ |
| Storage temperature | -40℃～95℃ |
| Output mode | CAN/LIN（Customizable） |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
