Description
The YDS13 vibration-temperature composite sensor is a specialized Integrated Electronics Piezoelectric (IEPE) sensor designed for monitoring equipment health. It can simultaneously measure vibration acceleration and temperature signals and has obtained intrinsic safety explosion-proof certification. This sensor provides support for equipment perception, diagnosis, and predictive maintenance solutions.
Application
- Machinery Health Monitoring: Ideal for continuous monitoring of the health status of mechanical equipment such as pumps, fans, motors, and compressors. By analyzing the vibration and temperature data, maintenance personnel can detect early signs of equipment failure, such as bearing wear, overheating, or imbalance.
- Predictive Maintenance: The sensor's data can be used to develop predictive maintenance strategies. By predicting when equipment components are likely to fail, maintenance can be scheduled proactively, reducing downtime and maintenance costs.
- Quality Control: In manufacturing processes, the YDS13 sensor can be used to monitor the vibration and temperature of production machinery. Stable vibration and temperature levels are indicative of proper machine operation, and any deviations can signal quality issues or impending equipment failures, allowing for immediate corrective actions.
Features
- Composite Output: The ability to provide both vibration and temperature outputs in a single sensor simplifies the monitoring system setup and reduces costs. It offers a more comprehensive understanding of the equipment's operating conditions.
- Isolation and Anti-interference: The isolated floating design, combined with low noise and strong anti-interference capabilities, ensures accurate and stable signal output. This helps in obtaining reliable data even in noisy industrial environments.
- High Protection Level: Encased in a full-metal housing, the sensor has a high protection level, making it resistant to dust, water, and other harsh environmental factors.
- Explosion-proof Certification: The Ex ia IIC T6 Ga explosion-proof certification allows the sensor to be used in hazardous areas, expanding its application scope in industries such as petrochemicals, mining, and oil and gas.
Specifications
| Name | Specification |
|---|---|
| Sensitivity (160Hz, 3g, 20±5℃) | 100mV/g (±5%) |
| Measurement Range | ±50g pk |
| Transverse Sensitivity | ≤5% |
| Frequency Response (±10%) | 1～10000Hz |
| Resonant Frequency | 28kHz |
| Amplitude Non-linearity | ≤1% |
| Shock Limit | 2000g |
| Supply Current | 2～10 mA |
| Supply Voltage | 18～28 V (Constant Current Source) |
| Output Voltage (Peak) | ≤5V |
| Bias Voltage | 12±2V |
| Noise | ＜2mg |
| Vibration Output Impedance | ＜100Ω |
| Temperature Sensitivity | 10mV/℃ |
| Temperature Measurement Range | -40℃～100℃ |
| Maximum Temperature Measurement Deviation | 3℃ |
| Temperature Output at 0℃ | 0.5V or 2.5V |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
