| Model: | WPCK62 |
| Detection principle: | Diffused Silicon, piezoresistance |
| Output signal: | 4-20mA |
| Resolution and accuracy: | ±0.5%FS |
| Response time: | ＜4ms |
| Pressure Range: | 0～35kPa…25MPa |
| Pressure Reference: | Gauge Pressure/Absolute Pressure/Sealed Gauge Pressure |
| Working Temperature: | -30℃-100℃ |
| Diaphragm material: | SS 316L |
WPCK62 Manual download
Get Price Whatsapp
Description
WPCK62 general type diffused silicon pressure transmitter is a small and light weight pressure transmitter, which is cost-effective and simple for installation.
The pressure core is made by WINSEN, through highly reliable amplification circuit and precise temperature compensation, the pressure of the measured medium is converted into a standard current signal.
The integrated stainless steel structure improves the overall anti-corrosion performance. It can meet requirements of pressure measurement and control in various environmental conditions.
WPCK62 pressure transmitter has various output forms and pressure interface which can be customized according to your requirements. This transmitter can be widely used in water pumps, Intelligent water supply, air compressor, automobile, air conditioner, water treatment, pneumatic hydraulic control and etc.
Application
This transmitter can be widely used in water pumps, Intelligent water supply, air compressor, automobile, air conditioner, water treatment, pneumatic hydraulic control and etc.See Manual
Features
The integrated stainless steel structure improves the overall anti-corrosion performance. It can meet requirements of pressure measurement and control in various environmental conditions.
Specifications
| BasicParameter Index | ||
| Pressure range | 0～35kPa…25MPa | |
| PressureReference | GaugePressure/AbsolutePressure/Sealed Gauge Pressure | |
| Output | 4-20mA | Optional |
| Accuracy | ±0.5%FS | |
| TemperatureDrift | ≤±1.5%FS（-20℃～85℃） | |
| Hysteresis and Repeatability | ≤±0.1%FS | |
| Thread | M20*1.5 | Optional |
| ElectricalConnection | Cable | |
| TemperatureCompensation | -30℃-100℃ | |
| Environment Temperature | -20℃-85℃ | |
| Response Time | ＜4ms | |
| Housing material | SS304 | |
| Diaphragm Material | SS316L | |
| VibrationResistance | Impact：200g/1ms | |
| Free fall：1m | ||
| Protection Level | IP65 | |
| InsulationResistance | ≥100MΩ/500VDC | |
| Weight | 150g～230g | |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
