Description
The WAV04 is an Integrated Electronics Piezoelectric (IEPE) sensor equipped with an isolated and shear structure. Boasting a wide frequency range and stable technical performance, it is designed for long-term surveillance of industrial equipment like pumps, fans, and motors, delivering voltage signals that fluctuate with the vibration state.
Application
- Industrial Equipment Condition Monitoring: It is extensively used for continuously monitoring the vibration of industrial equipment such as pumps, fans, motors, and compressors. By analyzing the vibration signals, maintenance personnel can detect early signs of equipment failure, enabling timely preventive maintenance and reducing downtime.
- Predictive Maintenance Programs: The accurate vibration data provided by the WAV04 sensor can be integrated into predictive maintenance systems. This data helps in predicting the remaining useful life of equipment components, optimizing maintenance schedules, and reducing maintenance costs.
- Quality Control in Manufacturing: In manufacturing processes, the sensor can be used to monitor the vibration of production machinery. Stable vibration levels are indicative of proper machine operation, and any deviations can signal quality issues or impending equipment failures, allowing for immediate corrective actions.
Features
- Side-end Two-wire IEPE Output: The side-end two-wire IEPE voltage output not only simplifies the wiring process but also reduces the potential for signal interference, making it convenient for installation in various industrial setups.
- Low Noise and Anti-interference: With its double shielding and insulated signal ground, the sensor effectively suppresses external noise and interference, ensuring accurate and stable signal output even in noisy industrial environments.
- High Protection Level: Encased in a full-metal housing with an IP67 waterproof rating, the WAV04 sensor can withstand harsh environmental conditions, including dust, water immersion, and extreme temperatures, enhancing its durability and reliability.
- Wide Frequency Range: The sensor's broad frequency response from 1 to 10000Hz allows it to detect a wide variety of vibration frequencies, making it suitable for monitoring different types of industrial equipment.
Specifications
| Name | Specification |
|---|---|
| Sensitivity (160Hz, 3g, 20±5℃) | 100mV/g (±5%) |
| Measurement Range | ±50g pk |
| Transverse Sensitivity | ≤5% |
| Frequency Response (±10%) | 1～10000Hz |
| Amplitude Non-linearity | ≤1% |
| Resonant Frequency | 30kHz |
| Shock Limit | 2000g |
| Supply Current | 2～10 mA |
| Supply Voltage | 18～28 V (Constant Current Source) |
| Output Voltage (Peak) | ≤5V |
| Bias Voltage | 12±2V |
| Noise | ＜2mg |
| Output Impedance | ＜100Ω |
| Operating Temperature | -50～120℃ |
| Weight | 110g |
| Housing Material | SUS304 |
| Waterproof Rating | IP67 |
| Mounting Method | M6 |
| Output Type | Side-end 5/8-24 Two-core Output |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
