Description
The WAI01 is a specialized piezoelectric acceleration sensor with embedded precision circuits, evolved from traditional acceleration sensors. Boasting stable technical performance and excellent dynamic characteristics, it measures vibration velocity in machinery like pumps, fans, and motors, outputting current signals proportional to vibration acceleration.
Application
- Equipment Monitoring: Ideal for continuous vibration acceleration measurement in pumps, fans, motors, and other rotating machinery.
- Lightweight Solutions: Suited for applications where compact size and low weight are critical, without compromising performance.
Features
- High Signal Quality: Features a 4~20mA two-wire output for easy integration, with low noise and strong anti-interference capabilities.
- Rugged Design: Fully enclosed in metal with an IP66 waterproof rating, ensuring durability in harsh environments.
- Safety Assurance: Certified with Ex ia IIC T6 Ga explosion protection, allowing use in hazardous areas.
Specifications
| Name | Specification |
|---|---|
| Output Signal | 4~20mA |
| Measurement Range | 0~20g (Optional) |
| Frequency Response | 4~2000Hz |
| Resonant Frequency | 15kHz |
| Non-linearity | ≤2% |
| Shock Limit | 1000g |
| Supply Voltage | 18~30V (DC) |
| Operating Temperature | -40～85℃ |
| Weight | 80g |
| Housing Material | SUS304 |
| Waterproof Rating | IP66 |
| Piezoelectric Material | PZT5 |
| Mounting Method | M6 |
| Output Type | Top 5/8-24 Two-core Output |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
