| Target: | oxygen concentration and flow in oxygen |
| Model: | US1000 |
| Detection range: | (Concentration)21%～95.6%/(Flow)0～10L/min |
| Detection principle: | Ultrasonic oxygen sensor |
| Characteristics: | Good consistency,Real-time response,High precision |
| Size: | 120mm*30mm*30mm(L*W*H) |
| Output signal: | UART(3.3V) |
| Resolution and accuracy: | ± 1.5%FS @(5～45)℃ |
| Response time: | T90＜15s |
US1000 Manual download
Get Price Whatsapp
Description
The US1000 ultrasonic oxygen sensor is mainly used in the detection of oxygen concentration and flow in oxygen concentrators and related products. It uses ultrasonic sensors to detect the propagation speed of ultrasonic waves in gas, and uses temperature compensation to accurately calculate oxygen concentration and flow.
Application
- Household oxygen generator
- Medical oxygen concentrator
Features
- Good consistency
- Real-time response
- High precision
- Good stability
- long lifespan
- Calibration-free
Specifications
| Model No. | US1000 | |
| Detection method | ultrasound | |
| Detection gas | O2 | |
| Concentration | Measuring range | 21%～95.6% |
| Measurement accuracy | ±1.5%FS @(5～45)℃ | |
| Resolution | 0.1% | |
| Response time | ≤15s T90 （Can be customized according to customer requirements, the fastest≤1s） | |
| Flow | Measuring range | 0～10L/min |
| Measurement accuracy | ±0.2L/min@(5～45)℃ | |
| Resolution | 0.1L/min | |
| Response time | ≤15s T90 （Can be customized according to customer requirements, the fastest≤1s） | |
| Working voltage | 4.5～13.2V | |
| Average current | ≤30mA | |
| Working environment | 0～55℃； 0～95%RH（ no condensation ） | |
| Storage environment | -30～65℃； 0～95%RH（ no condensation ） | |
| Output signal | UART(3.3V) | |
| Dimensions | 120mm*30mm*30mm(L*W*H) | |
| Weight | 25g | |
| Lifespan | ≥5 years | |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
