Model: RGF-L1212
Response time: 200µs


Get Price Whatsapp

Description

The uncooled lead sulfide (PbS) sensor belongs to the lead - salt type infrared photoconductive sensor family. Its working principle is grounded in the photoconductive effect of semiconductor materials. Through this mechanism, it converts infrared radiation energy into electrical signals. The PbS sensor demonstrates strong absorption and response within the short - infrared (1.0 - 3.0μm) spectral bands. It is widely applied in infrared gas detection, as well as flame and high - temperature detection.

Application

  • Appropriate for flame monitoring in flammable and explosive areas.
  • Detection of sparks and flash points.
  • Temperature detection of high - temperature industrial furnaces.
  • Infrared spectrum analysis.

Features

  • Housed in a TO - 5 package.
  • Operates in an uncooled mode.
  • Features a fast response.
  • Exhibits a high detection rate.

Specifications

Parameter Value
Model RGF-L1212(H/A/B)
Photosensitive area 2x2mm
Response time 200µs
Dark resistance 0.3 - 3.0MΩ
Response wavelength range 1 - 3μm
Window type Sapphire; Narrow Band Filters
Working temperature - 30 to 60°C
Central wavelength Sapphire: 1 - 6µm; Narrow Band Filters: 1.05µm, 2.7µm
Peak Responsivity 4×10⁵ V/W
Peak Normalized Detection Rate 1×10¹¹ cm·Hz½/W

* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.

Technical Support:

Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.

The sensors don't have sleeping mode. It can be set in program if needed.

All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.

The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.

However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.

15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.

Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.

Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.

Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com

Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.

LEADING GAS SENSING SOLUTION SUPPLIER

RELATED PRODUCTS