![ME4-CO-E4 Carbon Monoxide Gas Sensor](/d/pic/newpic/me4-co-e4.jpg)
Target: | CO |
Model: | ME4-CO-E4 |
Detection range: | 0-1000ppm, Max 2000ppm |
Detection principle: | Electrochemical |
Characteristics: | Urban atmosphere and enterprise environmental monitoring, unorganized emission pollution gas monitoring in factories, emergency monitoring, environmental assessment and monitoring |
Size: | φ32×14.5 |
Working conditions: |
Resolution ratio <10ppb Response time<30s Anticipated using life 2 years |
ME4-CO-E4 Manual download
Get Price Whatsapp
Description
ME4-CO-E4 carbon monoxide gas sensor is constant potential electrolysis type. Oxidation-reduction reaction with carbon monoxide and oxygen take place respectively on the working electrode and on the counter electrode. The process releases electric charge and generates current. The current is in direct proportion to the concentration of carbon monoxide. So the concentration of the target gas could be got by measuring the value of current. The 4th electrode (auxiliary electrode) is used to compensate the zero current, to make it has the characteristics of strong signal level and low zero current.
Application
Urban atmospheric monitoring, enterprise environmental monitoring, emission gas monitoring, emergency environmental monitoring, and environmental evaluate monitoring.
Features
- High precision
- High sensitivity
- Short response time
- Good anti-interference ability
- High resolution
- Wide linear range
Specifications
Detection gas | Carbon monoxide (CO) |
Detection range | 0~1000ppm |
Max range | 2000ppm |
Sensitivity | 0.3~0.5µA/ppm |
Resolution | <10ppb |
Response time (T90) | < 30S |
Load resistance(Recommended) | 33-100Ω (Recommended) |
Output linearity | Linear |
Stability (/month) | <10% |
Zero drift (-20℃~40℃) | <±100ppb |
Temperature range | -30℃~50℃ |
Humidity range | 15%~90% RH |
Pressure range | 80-120kPa |
Life span | 2 years (in air) |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.