Filter By Group1:
Filter By Group2:
ZH10-VHT Compact 4-in-1 Air Quality Sensor Module
- PM2.5,VOC,Temperature,Humidity
- Read More
ZS21 Temperature and Humidity Sensor Module
- Temperature and Relative Humidity
- Read More
Multi-in-One Sensor Module ZPHS01C
- PM2.5, CO2, CH2O, TVOC,Temperature&Humidity
- CO2: 400~5000ppm; PM2.5: 0-1000μg/m³; CH2O: 0-1.6ppm; VOC: 4 level; Temperature: 0-65℃ (Accuracy±0.5℃); Humidity: 0-100%RH (Accuracy±3%)
- Read More
WSP2110 VOC Gas Sensor
- toluene, methanal, benzene, alcohol, acetone &etc.
- 1~50ppm
- Read More
Photoionization PID Sensor 4R-PID
- VOC,Energy≤10.6eV Volatile Gases
- 0~10000 ppm
- Read More
Electrochemical TVOC Detection Module ZE40B-TVOC
- Alcohol
- 0~2 ppm
- Read More
MG-812 Low Power-Consumption CO2 Sensor
- CO2
- 0~ 10000ppm CO2
- Read More
Multi-in-One ZPHS01B Sensor Module
- CO2. PM2.5. CH2O. O3. CO. TVOC. NO2. Temperature. Humidity
- See Manul
- Read More
MW-TDS101 TDS Water Quality Sensor
- TDS
- 0-2000ppm
- Read More
ZW-TDS102 TDS Water Quality Detection Module
- TDS
- 0-2000μs/cm
- Read More
ZH08 Laser dust sensor
- PM1.0, PM2.5, PM10
- Read More
ZH07 Laser dust sensor
- PM2.5
- 0-1000μg/m³
- Read More
ZH06-IV Laser dust sensor
- PM2.5
- 0-1000μg/m³
- Read More
ZH06-III Laser dust sensor
- PM2.5
- 0-1000μg/m³
- Read More
ZH06-II Laser dust sensor
- PM2.5
- 0-1000μg/m³
- Read More
ZH06-Ⅰ Laser dust sensor
- PM2.5
- 0-1000μg/m³
- Read More
ZPH03 Particles Sensor
- PM2.5
- 4 ~ 500ug/m
- Read More
MS-Z3 Macromolecule Humidity Sensor
- Environment relative humidity,temperature
- Read More
ZS05 Temperature and Humidity Module
- Environment relative humidity,temperature
- Read More
ZS03 Temperature and Humidity Module
- Environment relative humidity,temperature
- Read More
WHT20B MEMS type Temperature and Humidity Sensor
- Environment relative humidity,temperature
- Read More
MW-O101 dissolved oxygen water quality detection sensor
- Solution
- 0~20 mg/L
- Read More
MW-pH101 water quality detection sensor
- Liquid
- 1~14
- Read More
MW-ORP101 water quality detection sensor
- Liquid
- -2000 mV ~﹢2000 mV
- Read More
Atmospheric Monitoring Sensor Module ZEHS04
- CO, SO2, NO2, O3 (Scalable PM2.5, PM10, Temperature, Humidity)
- See manual
- Read More
Electrochemical Detection Module ZE12A
- CO, SO2, NO2, O3
- CO (0-10ppm), SO2 (0-1ppm), NO2 (0-1ppm), O3 (0-1ppm)
- Read More
ZPHS01 Multi-in-One Sensor Module (HCHO version)
- CO2, PM2.5, CH2O, VOC, Temperature, Humidity
- CO2: 0-5000ppm; PM2.5: 0-1000μg/m³; CH2O: 0-1.6ppm; VOC: 4 level; Temperature: 0-65℃ (Accuracy±0.5℃); Humidity: 0-100%RH (Accuracy±3%)
- Read More
ZPH02 Particles and VOC Sensor
- Dust PM2.5, VOC
- VOC is 5 level Output
- Read More
ZM01 MEMS VOC Gas Sensor Module
- VOC
- 0-5ppm
- Read More
ZP07 Air-Quality Detection Module
- formaldehyde, benzene, carbon monoxide, hydrogen, alcohol, ammonia, smoke of cigarette, essence &etc.
- Output 0-3 grade pollution signal
- Read More
ZP01-MP503 Air-Quality Detection Module
- formaldehyde, benzene, carbon monoxide, hydrogen,alcohol, ammonia, smoke of cigarette, essence
- Output 0-3 grade pollution signal
- Read More
MH-Z19E NDIR CO2 Module
- CO2
- 400~10000ppm optional
- Read More
MH-Z1911A NDIR CO2 Module
- CO2
- 400~10000ppm optional
- Read More
MH-Z19C NDIR CO2 Module
- CO2
- 400~10000ppm optional
- Read More
MH-V1512A NDIR CO2 Module for Automotive
- CO2
- 400~10000ppm optional
- Read More
MH-Z1311A NDIR CO2 Module
- CO2
- 0~10000ppm optional
- Read More
MH-Z16 Infrared CO2 Gas Module
- CO2
- 400~10000ppm optional
- Read More
MH-Z14B NDIR CO2 Module
- CO2
- 400~10000ppm optional
- Read More
MH-Z14A NDIR CO2 Module
- CO2
- 400~10000ppm optional
- Read More
ME2-CH2O-16×15 Formaldehyde Sensor
- CH2O
- 0-5ppm, Max 20ppm
- Read More
ME2-O3-16x15 O3 Gas Sensor
- O3
- 0-10/100ppm,Max 200ppm
- Read More
ME2-O3 O3 Gas Sensor
- O3
- 0-10/100ppm,Max 200ppm
- Read More
MP905 Air-Quality Gas Sensor
- alcohol, smoke, formaldehyde, toluene, benzene,lighter gas,paint &etc.
- 0.5-1000ppm(C2H5OH)
- Read More
MP503 Air-Quality Gas Sensor
- C2H5OH、smoke、iso-butane、CH2O
- 10-1000ppm(C2H5OH)
- Read More
GM-502B MEMS VOC Gas Sensor
- VOC、C2H5OH、CH2O、C7H8
- 1-500ppm
- Read More
Help you compare our sensors
Table Overview for Winsen Environmental Protection
Unsure which sensor to choose, please leave your infomation or email us
Modle | Detection principle | Characteristics | Target gas | Detection range | Size |
---|---|---|---|---|---|
ZH10-VHT |
Laser spectral absorption | Good consistency;Real time response;Accurate data; | PM2.5,VOC,Temperature,Humidity | 38×35×12mm(L×W×H) | |
ZS21 |
Semiconductor, Module | Fully calibrated, Wide power supply voltage range, from 2.0V to 5.5V,Digital output, standard I²C signal | Temperature and Relative Humidity | ||
ZPHS01C |
Module, electrochemical, semiconductor VOC sensor, laser particle sensor, NDIR CO2 sensor and temperature & humidity sensor | This module integrates Electrochemical formaldehyde, Semiconductor VOC sensor, Laser particle sensor, NDIR CO2 sensor and temperature & humidity sensor. | PM2.5, CO2, CH2O, TVOC,Temperature&Humidity | CO2: 400~5000ppm; PM2.5: 0-1000μg/m³; CH2O: 0-1.6ppm; VOC: 4 level; Temperature: 0-65℃ (Accuracy±0.5℃); Humidity: 0-100%RH (Accuracy±3%) | 62.5mm (L) x 61mm(W) x 25mm(H) |
WSP2110 |
Semiconductor | High sensitivity to organic gases such as toluene, benzene, methanal; quick response and recovery; low power consumption, simple detection circuit, good stability and long life. | toluene, methanal, benzene, alcohol, acetone &etc. | 1~50ppm | |
4R-PID |
High sensitivity; Wide detection range | VOC,Energy≤10.6eV Volatile Gases | 0~10000 ppm | ||
ZE40B-TVOC |
Electrochemical | High sensitivity, high resolution, low power consumption, long lifespan,RESET compliant | Alcohol | 0~2 ppm | |
MG-812 |
Semiconductor | Small sizes, low power-consumption, high sensitivity and good selectivity | CO2 | 0~ 10000ppm CO2 | |
ZPHS01B |
Module | See Manul | CO2. PM2.5. CH2O. O3. CO. TVOC. NO2. Temperature. Humidity | See Manul | 135 x 50 x 26.2mm (L x W x H) |
ZW03 |
Electrochemical | Low power consumption,high accuracy ,linear output, easy calibration and excellent stability. | pH water | 40×25mm | |
MW-TDS101 |
High precision, fast response, good stability, small size and easy installation. | TDS | 0-2000ppm | ||
ZW-TDS102 |
Digital signal output | Low power, high precision, linear output, convenient calibration and good stability | TDS | 0-2000μs/cm | 58X38mm |
ZH08 |
Mie Scattering Theory | Good consistency,Real time response,RESET compliant | PM1.0, PM2.5, PM10 | 58.5×44.5×14.8mm(L×W×H) | |
ZH07 |
Mie Scattering Theory | Good consistency,Real time response,Low power consumption,RESET compliant | PM2.5 | 0-1000μg/m³ | 48×40×12.5mm(L×W×H) |
ZH06-IV |
Mie Scattering Theory | Good consistency,Real time response,Accurate data,RESET compliant | PM2.5 | 0-1000μg/m³ | 47×37×12.2mm(L×W×H) |
ZH06-III |
Mie Scattering Theory | Good consistency,Real time response,Accurate data,RESET compliant | PM2.5 | 0-1000μg/m³ | 47×37×12.6mm(L×W×H) |
ZH06-II |
Mie Scattering Theory | Good consistency,Real time response,Accurate data,RESET compliant | PM2.5 | 0-1000μg/m³ | |
ZH06-Ⅰ |
Mie Scattering Theory | Good consistency,Real time response,Accurate data,RESET compliant | PM2.5 | 0-1000μg/m³ | 47×37×12.2mm(L×W×H) |
ZPH04 |
Mie Scattering Theory | Good Stability for long time,Easy to install and use | PM2.5 | 59.5×44.5×20mm(L×W×H) | |
ZPH03 |
Mie Scattering Theory | Good Stability for Long Time,Low Consumption,Good Anti-interference Performance | PM2.5 | 4 ~ 500ug/m | 46.0×32.0×18.3mm(L×W×H) |
MS-Z3 |
Made of polymer humidity-sensitive material | 1、Wide humidity detected rang;2、Fast response;3、Small Humidity hysteresis error;4、Simple manufacture;5、Easy integration;6、Low cost | Environment relative humidity,temperature | ||
ZS05 |
Temperature and humidity detection | 1、Low cost, Low power consumption, Small sizes;2、High sensitivity;3、Standard IIC digital interface;4、RESET compliant | Environment relative humidity,temperature | ||
ZS03 |
Temperature and humidity detection | 1.Low cost, Low power consumption, Small sizes;2.Single wire serial interface, High sensitivity; 3.Calibrated, digital output;4.RESET compliant | Environment relative humidity,temperature | ||
WHT20B |
MEMS capacitive humidity sensor | 1、High accuracy ±3.0% RH and ±0.5℃;2、Wide power supply voltage range, from 2.0V to 5.5V;3、SMD package suitable for reflow soldering;4、Quick response and strong anti-interference ability;5、Excellent long-term stability under high humidity condition | Environment relative humidity,temperature | ||
MW-O101 |
It is a galvanic battery type dissolved oxygen water quality detection sensor. | Low power consumption, high precision, linear output, no need to replace the breathable membrane, no need to replace the electrolyte. | Solution | 0~20 mg/L | |
MW-pH101 |
It is an electrochemical PH water quality detecting sensor | Low power consumption, wide linear range, excellent repeatability and stability. | Liquid | 1~14 | |
MW-ORP101 |
A primary battery type ORP water quality detection sensor. | High precision, fast response, good stability, small size, low power consumption, easy to carry | Liquid | -2000 mV ~﹢2000 mV | |
ZEHS04 |
Module, electrochemical | Urban atmospheric environmental monitoring; Unorganized emissions of pollution monitoring at factory sites; Portable instruments, air quality monitoring equipment, and smart home equipment. | CO, SO2, NO2, O3 (Scalable PM2.5, PM10, Temperature, Humidity) | See manual | 12cm*10cm*6cm (L*W*H) |
ZE27-O3 |
Module, electrochemical | Portable O3 detector, air-quality monitor device, Ozone disinfection cabinet, smart home device, etc. | O3 | 0~10ppm | 17.1x19.2x4.5mm |
ZE14-O3 |
Module, electrochemical | Ozone disinfection cabinet, smart home devices, etc. | O3 | 0~100ppm | 22x26x18.2mm |
ZE12A |
Module, electrochemical | City atmospheric environmental monitoring , enterprise environment monitoring, Factory area unorganized emission monitoring, emergency monitoring, environment evaluation monitoring, Portable gas detector, various gas detection equipment and smart home ap | CO, SO2, NO2, O3 | CO (0-10ppm), SO2 (0-1ppm), NO2 (0-1ppm), O3 (0-1ppm) | Φ39×44 mm |
ZE08-CH2O |
Module,electrochemical | Portable detector, air-quality monitor, air cleaner, air renewal system, air conditioner, smart home. | CH2O | 0~5ppm | 23x25x4.4mm |
ZPHS01 |
Module, electrochemical, semiconductor VOC sensor, laser particle sensor, NDIR CO2 sensor and temperature & humidity sensor | This module integrates Electrochemical formaldehyde, Semiconductor VOC sensor, Laser particle sensor, NDIR CO2 sensor and temperature & humidity sensor. | CO2, PM2.5, CH2O, VOC, Temperature, Humidity | CO2: 0-5000ppm; PM2.5: 0-1000μg/m³; CH2O: 0-1.6ppm; VOC: 4 level; Temperature: 0-65℃ (Accuracy±0.5℃); Humidity: 0-100%RH (Accuracy±3%) | Length×Width: 72x61 |
ZPH02 |
ZPH02 Particles and VOC " Module,semiconductor, NDIR dust | Dust sensor and VOC sensor integrated, the sensor has been aged, debuged, calibrated before delivery and has good consistency and high sensitivity | Dust PM2.5, VOC | VOC is 5 level Output | 59.5×44.5×17 |
ZM01 |
Module,semiconductor,MEMS | High sensitivity and small size, and adopts I2C digital signal output mode | VOC | 0-5ppm | 5×5×1.55 |
ZP07 |
Module,semiconductor | High sensitivity,excellent long term stability, calibrated before shipment 10 seconds to 3 minutes with auto-preheating function Faulty auto-check | formaldehyde, benzene, carbon monoxide, hydrogen, alcohol, ammonia, smoke of cigarette, essence &etc. | Output 0-3 grade pollution signal | 24×20×16 |
ZP01-MP503 |
Module,semiconductor | Calibrated before shipment, (10S-4Min)with auto-preheating function, faulty auto-check | formaldehyde, benzene, carbon monoxide, hydrogen,alcohol, ammonia, smoke of cigarette, essence | Output 0-3 grade pollution signal | 24×20×16 |
MH-Z19E |
non-dispersive infrared (NDIR) principle | 1. High sensitivity, low power consumption; 2, Good stability; 3. Temperature compensation, excellent linear output; 4. Multiple output modes: UART, PWM; 5.RESET compliant | CO2 | 400~10000ppm optional | 32.9x19.7x8.6mm (LxWxH) |
MH-Z1911A |
non-dispersive infrared (NDIR) principle | 1. High sensitivity, low power consumption; 2, Good stability; 3. Temperature compensation, excellent linear output; 4. Multiple output modes: UART, PWM; 5.RESET compliant | CO2 | 400~10000ppm optional | 32.9x19.7x8.6mm (LxWxH) |
MH-Z19C |
non-dispersive infrared (NDIR) principle | 1. Chamber is gold plated; 2. High sensitivity, low power consumption; 3. Good stability; 4. Temperature compensation, excellent linear output;5.RESET compliant | CO2 | 400~10000ppm optional | 32.9x19.7x8.6mm(LxWxH) |
MH-V1512A |
non-dispersive infrared (NDIR) principle | Lin interface. Extremely low power consumption, excellent for for in-car air quality, vehicle HVAC and ventilation. | CO2 | 400~10000ppm optional | 33.02x22x9.33mm (LxWxH) |
MH-Z1311A |
non-dispersive infrared (NDIR) principle | 1. The air chamber adopts electroplating treatment, waterproof and anti-corrosion 2. High sensitivity, low power consumption 3. Excellent stability 4. Temperature compensation, excellent linear output 5.RESET compliant | CO2 | 0~10000ppm optional | 32.36x19.5x11.4mm(LxWxH) |
MH-Z16 |
non-dispersive infrared (NDIR) principle | Educational instruments, animal husbandry production | CO2 | 400~10000ppm optional | 57.15x34.7x14.5mm (LxWxH) |
MH-Z14B |
non-dispersive infrared (NDIR) | 1. Chamber is gold plated, water-proof and anti-corrosion; 2. High sensitivity, low power consumption; 3. Good stability; 4. Temperature compensation, excellent linear output; 5. Multiple output modes: UART, PWM; 6. Long lifespan; 7. Anti-water vapor inte | CO2 | 400~10000ppm optional | 57.15x34.7x14.5mm(LxWxH) |
MH-Z14A |
non-dispersive infrared(NDIR)principle | 1. Chamber is gold plated, water-proof and anti-corrosion; 2. High sensitivity, low power consumption; 3. Good stability; 4. Temperature compensation, excellent linear output; 5. Multiple output modes: UART, PWM; 6. Long lifespan; 7. Anti-water vapor inte | CO2 | 400~10000ppm optional | 57.15x34.7x14.5mm(LxWxH) |
ME2-CH2O-16×15 |
Electrochemical | Civil use,low consumption,high precision,high sensitivity,good anti-interference ability | CH2O | 0-5ppm, Max 20ppm | 16×15×6.2 |
ME2-O3-16x15 |
Electrochemical | Civil use,low consumption,high precision,high sensitivity,good anti-interference ability | O3 | 0-10/100ppm,Max 200ppm | 16×15×6.2 |
ME2-O3 |
Electrochemical | Use for industrial and environmental protection fields | O3 | 0-10/100ppm,Max 200ppm | φ20×16.4 |
MP905 |
Semiconductor | High sensitivity to benzene,toluene,formaldehyde,alcohol,smoke,lighter gas,paints | alcohol, smoke, formaldehyde, toluene, benzene,lighter gas,paint &etc. | 0.5-1000ppm(C2H5OH) | φ9.4×7.5 |
MP503 |
Semiconductor | High sensitivity to C2H5OH、smoke、iso-butane、CH2O | C2H5OH、smoke、iso-butane、CH2O | 10-1000ppm(C2H5OH) | φ9.4×7 |
GM-502B |
Semiconductor、MEMS | MEMS technology, good shock resistance, small sizes and low power consumption | VOC、C2H5OH、CH2O、C7H8 | 1-500ppm | 5×5×1.55 |
- 0086-371-67169097
- sales@winsensor.com
- Mon - Fri 9am - 6pm
ARE YOU LOOKING FOR SENSOR
Not sure which sensor is right?
Get a free initial consultation right now
WHAT WE DO
Environmental Protection Knowledge
Keeping low CO2 level is important for human health, which not only means that the current environment has sufficient fresh air, but also greatly reduce the risk of building syndrome. Winsen CO2 sensor meets RESET standard, which is widely used in control panels or thermostats for HVAC systems.