ZEQH-101 can effectively monitor the indicators such as CO2, CO, VOC concentration, temperature and pressure released before the battery thermal runaway is triggered, and transmit the measurement signal to the BMS through the CAN bus, with Remarkable features of accurate measurement, fast response, less cross-interference, low power consumption, long life and high reliability.

ZE21-CS/CO is a special-purpose and miniaturization module. It utilizes electrochemical principle to detect Battery liquid volatile gas and detection of gas generated when the battery burns burning gas, which makes the module with high selectivity and stability. Built-in temperature sensor can do temperature compensation; and it has digital output and analog voltage output.

The hydrogen leakage sensor ZC61 is mainly used in the monitoring of hydrogen leakage in hydrogen fuel cell engines and hydrogen gas supply pipeline systems. It has the characteristics of MEMS technology, intelligent algorithm, anti-electromagnetic interference, CAN interface output, excellent repeatability and stability, long use life.

ZW-HC101 is an electrochemical conductivity detection module. By applying a periodically changing excitation signal at both ends of the electrode, different measurement signals are generated according to the conductivity of the liquid to be measured, thereby calculating the measured solution. Impedance, to achieve the measurement of the conductivity of the solution. It can be applied to the conductivity detection of special antifreeze for automotive fuel cells and other fields, and has the following characteristics: 1/2NPT pipe thread, easy to install in pipes or tanks; IP67 protection level, CAN communication; easy to connect to PLC, DCS, third-party equipment such as industrial control computers, general-purpose controllers, paperless recording instruments, or touch screens.

ZM102 is a digital, low-power, and miniaturized vehicle mounted sensor module used in automotive air conditioners. It uses MOX gas sensors, MEMS manufacturing technology and high-performance microprocessors. The working condition automatically adjusts the sensitivity and baseline of the sensor, high sensitivity, compact and precise; it can be used to detect the air pollution level inside and outside the car, such as the exhaust gas emitted by the front car, so as to control and close the intake valve of the car air conditioner to keep the air in the car fresh .

ZH32 uses the principle of Mie scattering to detect dust particles in the car. Through professional algorithms and calibration detection processes, it has good consistency and stability. It adopts LIN signal output mode, which is convenient to use. Small size, easy to integrate applications. Can be used in automotive air conditioning systems, automotive front-loading markets, and automotive air purifiers.

ZE15-CO is a general-purpose, miniaturized module. Using electrochemical principles to detect CO in the air, it has good selectivity and stability. Built-in temperature sensor for temperature compensation; also has digital output and analog voltage output, easy to use. It has the characteristics of high sensitivity, fast response, stable operation, and factory calibration.

ZP13 smoke module adopts advanced chip thick film semiconductor gas sensor, which has high sensitivity to smoke, propane and other gases. After aging, debugging, calibration and calibration, the module has good consistency and high sensitivity.

The CMV-2021D adopts MEMS technology and works according to the principle of catalytic combustion effect. The detection element and compensation element are paired to form an arm of the bridge. When hydrogen is encountered, the resistance of the detection element increases, and the output voltage of the bridge changes. The voltage variable It increases proportionally with the increase of hydrogen concentration, and the compensation element acts as a reference and temperature and humidity compensation. It is suitable for hydrogen detection in scenarios such as hydrogen energy vehicles, hydrogen energy preparation, hydrogen energy storage, hydrogen energy transportation and use.

ZE03 is a high-performance, general-purpose electrochemical series module. It uses a three-electrode electrochemical gas sensor and a high-performance microprocessor. It can measure the corresponding gas with different sensors. (Can detect CO, O2, NH3, H2S, NO2, O3, SO2, CL2, HF, H2, PH3, HCL and other gases) It has digital output and analog voltage output at the same time, which is convenient for users to use and debug, and greatly shortens the time for users design and development cycle.

ZE07-H2 is a general-purpose gas module designed and manufactured by combining mature electrochemical detection technology with sophisticated circuit design. Using electrochemical principles to detect H2 in the air, it has the characteristics of good selectivity, stability, high sensitivity, high resolution, low power consumption, and long service life.